5 Ways to Create Radio Ready Vocals

January 31, 2020

Vocals are the hardest part for most aspiring recording and mixing engineers to master, and actually - more often than not, it’s not all down to them! There’s a huge amount in the preparation on the vocalists side as well which is too often overlooked. Which brings me to the reason why we’ve written this post to help you, help them.. to help you.. Does that make sense? Anyway, I digress - Here are the 5 ways to create Radio Ready vocals!

 

Positioning

As we touched on in proximity effect, positioning is key to a good vocal, and a good performance. A lot of artists will fluctuate their positioning while recording, which is natural when they want to get a drink or check lyrics, etc. which means it’s your job to make sure they remain in place for their performance. A good trick, is to make sure you have a piece of electrical tape on the floor that they line their feet up with, or similar so they get a feel for this integral part of the take.

 

 

Warming up

Warm-ups are possibly the most ket thing for a good performance in my humble opinion, aside from confidence. 

 

Imagine you’ve decided to go for a run, (however unlikely in my case). If you didn't stretch prior, likelihood is you’ll end up with a torn or pulled muscle, or cramp at very least. The vocal chords are exactly the same, they are delicate and as a vocalist relies upon good health for their instrument it’s key to make sure a 15 to 30 minute warm up is in play before every session starts. 

 

There are a million online, both free and paid for, but if you're unsure - Youtube is your best friend. Here’s one I’ve used in the past myself:

 

 

Microphone and Preamp choice

If you picture an artist and their easel - Microphone choice is the main colour of your painting, and the preamp is the brush strokes and the timbre of the emotion your trying to portray. The reason I envision the recording chain is this; the microphone choice vary drastically. A ribbon is dark in color, a dynamic is typically more full of presence and higher mid range, and a Condenser is much more detailed, bright, and softest in musicality on the lower mid range. Matching the microphone to the voice is simply a process of elimination until you are happy, and the vocalist is happy, of course. 

 

 

Now the preamp is the timbre and musical flavor you add on top of that. A tube preamp like the dbx 676 can add sparkle and subtle overtones to the vocal, as well as harmonic distortion. The Joe Meek ProQ 2 Dual Channel strip (pictured below above the dbx 676) has an iron transpormer to add low-end harmonics and boost the low-mid range, but without is relatively transparent in sound and harnesses the musicality of the microphone. However, my personal favorite out of my arsenal is my Focusrite ISA One due to the transformer saturation added and harmonic distortion created from this. Another great example of that sort of preamp, is the Neve 1073 which is a solid tate preamp using input and output transformer to create a warm, revered sound heard on countless records. 

 

 

Make sure you and the artist learn the song!

Practice Practice Practice. The artist should have their parts dialed in perfectly in their mind's eye - this isn’t to say they shouldn’t be open to change, or that you shouldn’t be pushing them to get the pest out of their performance. Rather, that they have the song well rehearsed which will only benefit them - less time, less money, more confidence in their ability, and much more open to ideas and change to enhance their tracks!

 

The flip side is making sure you have either a demo, or have engaged in some form of pre production to learn their songs well too. This will only benefit you, regardless of whether you like the track or such, it makes you look much more profession, mouch easier to work with, and it avoids the majority of confusion in long sessions where you lose track of where you are in a song (which can be frustrating for an artist that is in a zone and would like to keep momentum).

 

 

 

Confidence & A Vibe

It can not be understated the importance of making the vocalist feel as comfortable, in control, and as full of confidence as they can be. You can have a huge impact on the way your final takes sound from the performer just from your mannerisms, the way you portray feedback, etc. - hell, even my room has mood lighting, incense oils and a warm lighting to bring vibe, and character to the room so they channel their emotion into the track in the way they and yourselves would ideally like. Look at any studio and they will have a ‘vibe’ to them, a certain ‘je ne sais quoi’ as my french counterparts would say, that makes you want to record, it makes you confident, it makes brings out the best in you. Make sure your studio and the vocalist your working with feels tis as well, even if its as simple as lunch in the common area, or sharing a beer with them while you record - just make sure you don’t have it near your equipment!

 

Share on Facebook
Share on Twitter
Please reload

Featured Posts

The 5 Components of a Successful Bands Marketing

January 23, 2020

1/7
Please reload

Recent Posts